-
Regular price From 2,16 €Regular price
Sale price From 2,16 € -
Regular price From 8,99 €Regular price
Sale price From 8,99 € -
Regular price From 6,83 €Regular price
Sale price From 6,83 € -
Regular price From 12,22 €Regular price
Sale price From 12,22 € -
Regular price From 9,55 €Regular price
Sale price From 9,55 € -
Regular price From 9,44 €Regular price
Sale price From 9,44 € -
Regular price From 2,88 €Regular price
Sale price From 2,88 €
Guide Flat Bags
What are flat bags?
At a glance:
- LDPE 25 / 50 / 100–120 microns
- PP 40 microns
- OPP 30 microns (sealed seam)
- PLA 50 microns
- rLDPE 50 microns
- 40 × 60 to 800 × 1,200 mm
- Side or bottom seam
Flat bags are the simplest bag form: two film layers lying on top of one another, welded on three sides, with one open side for filling. No special closures, no stand-up function – but very economical per unit and versatile in use.
The material is usually LDPE or HDPE, depending on the desired look and tear resistance. For direct food contact, additionally certified to EU 10/2011.
What are flat bags suitable for?
- Food: baked goods, snacks, confectionery (food-grade variant)
- Spare parts: screws, fuses, small parts
- Clothing: T-shirts, underwear, fashion shipping
- Books & print: protective shipping bags
- Gifts: standard packaging with a bow
- Advertising: samples, sampling, mailings
Which flat bag variants are available?
- Transparent flat bags – crystal-clear, visible contents
- Food-grade flat bags – certified to EU 10/2011
- Extra strong flat bags – for sharp-edged contents
- Flat bags for spare parts – specially for the repair trade
- Sustainable flat bags – from recycled LDPE (GRS)
- Flat bags for packaging – standard for general packaging applications
Benefits of flat bags
- Economical: the lowest unit cost of all bag types.
- Versatile: adaptable for almost any application.
- Available food-grade to EU 10/2011.
- Transparent or printed – as required.
- Printable with your logo.
- Private & trade: standard quantities and bulk orders.
- Fast shipping from our warehouse.
Material properties of flat bags in detail
Flat bags are the simplest and best-selling packaging form, made of polyethylene or polypropylene. The material thickness and film type determine tear resistance, transparency and printability.
LDPE 50 microns — standard variant
Low-density polyethylene, flexible, clear transparent, cost-effective. The standard solution for light contents: textiles, small parts, shipping fill. Tear resistance for contents up to approx. 1 kg.
LDPE 100 microns — extra strong
Double material thickness for sharp-edged or heavy contents: tools, metal parts, industrial goods. Higher puncture resistance, suitable for shipping with higher stress requirements.
HDPE 25 microns — vest-bag look
High-density polyethylene film with a crackling look and high tear resistance at a low material thickness. The classic fruit-and-vegetable bag in food retail.
OPP 30 microns — transparent premium bag
Oriented polypropylene with crystal-clear brilliance and high stiffness. For presentation packaging, gift items, printed matter. Printable in flexo or gravure print.
Food-grade variant
LDPE and OPP films are certified to EU Regulation 10/2011 for direct food contact. Declaration of conformity on request. Suitable for dry and unpackaged foods: baked goods, confectionery, fruit, vegetables.
Standard delivery form: block-glued in 100 or 1,000 units, alternatively loose in a carton. Printed variants on a roll or die-cut.
Material comparison at a glance
| Variant | Material | Thickness / property | Typical application |
|---|---|---|---|
| Standard | LDPE | 50 microns, clear, up to approx. 1 kg | Textiles, small parts, shipping fill |
| Extra strong | LDPE | 100 microns, puncture-resistant | Tools, metal parts, industrial goods |
| Vest-bag look | HDPE | 25 microns, tear-resistant, crackling | Fruit & vegetables in food retail |
| Premium transparent | OPP | 30 microns, crystal-clear, stiff | Presentation, printed matter, gift |
Custom adaptation — sizes, printing and converting
Flat bags are the most versatile packaging type and can be freely converted.
Printing processes
Printing in the flexo print process with up to 8 colours, including Pantone special colours and a white underprint for text on transparent film. Full-surface printing across the entire outer face is possible.
Special sizes
Freely selectable formats in width (50–700 mm) and height (60–900 mm). From stock in 25, 50 and 100–120 microns (LDPE), 40 microns (PP) and 30 microns (OPP); other material thicknesses as a custom-made product on request. On request with Euro hole punching, side gussets, bottom gusset or tear notch.
Converting
Delivery form optionally block-glued, loose in a carton or wound on a roll — depending on your packaging line. For automated filling we supply roll stock with defined perforation.
Minimum quantity and delivery time
We clarify this individually following your enquiry. Submit an enquiry.
Sustainability and the EU Packaging Regulation (PPWR)
Flat bags made of pure LDPE, HDPE or OPP are mono-material – readily recyclable by today's standards. The PPWR recyclability grades apply from 2030 at the earliest (delegated act still pending).
Mono-material recycling
Pure PE bags are classified as polyethylene in German sorting plants via near-infrared detection (NIR) and fed into the PE recycling stream. OPP bags are assigned analogously to the PP stream. Both materials are established in the German sorting system.
Recyclate processing
For commercial applications without food contact, on request we process post-consumer recyclate (PCR) with contents of 30–80%. PCR/recyclate variants are currently still in the testing phase for food safety and are not yet approved for direct food contact.
Recyclable printing inks
On request we advise on printing inks that impair recycling as little as possible. Standard inks are nitrocellulose-based.
Material efficiency through downgauging
Where technically possible, we advise on material savings through thinner films: 50 microns instead of 60 microns saves approx. 17% material at comparable functionality.
Shipping & delivery
We ship promptly and reliably from our warehouse. For large orders, direct delivery by forwarder. For special sizes, the delivery time is arranged individually. Free shipping from €200 net within Germany.
Popular flat bag variants
Packaging bag overview & related types
- All packaging bags at a glance
- Ziplock bags – with a reclosable zip
- Stand-up pouches – stand upright
- Sealed edge bags – sealable
- Sustainable packaging
- Custom-made products with a logo
- Request free samples
- Film thickness in µm – how thick a bag should be
- Prices and tiers – price per carton and discount from 2, 5 and 10 cartons
- Packaging for bakeries – matching bag size per baked good and closures at a glance
- Flat pouch or stand-up pouch – price per piece, sizes and resealability compared
- Poly bags – PE bags for retail and shipping
- OPP or PE? – which bag material suits your goods
- Bag finder – the right bag in just a few clicks
Frequently asked questions about flat bags
What is a flat bag?
An economical pack made of two film layers lying on top of one another, welded on three sides, with one open side for filling. Synonyms: polybag, flat PE bag, plastic bag.
What is the difference from ziplock bags?
Flat bags have no integrated closure; they are welded or clipped shut. Ziplock bags have a zip profile. For reclosable, see ziplock bags.
Are flat bags food-grade?
Only the explicitly certified ones → food-grade flat bags to EU 10/2011 with a declaration of conformity.
How do I close a flat bag?
Heat sealing with a film welder (impulse or bar sealer), bag clip, adhesive tape or cable tie. For reclosable, choose ziplock bags instead.
Which wall thickness do I need?
40–60 microns for light contents, 60–80 microns standard, 100+ microns for heavy or sharp-edged contents (→ extra strong).
Suitable for clothing shipping?
Yes → flat bags for textiles in suitable sizes for T-shirts, jumpers, fashion shipping.
For e-commerce shipping?
Yes → flat bags for shipping as an economical polybag solution. For mailing bags with an adhesive closure, see the shipping & bags range.
Mini and XL sizes?
Yes – small flat bags from 50×80 mm and large flat bags up to 500×700 mm and more.
Food-grade flat bags for freezing?
Yes – LDPE stays flexible down to approx. −50 °C and is freezer-suitable. For frequent freeze-thaw cycles, a heavier wall thickness (80–120 microns) is recommended.
Are HDPE flat bags possible?
Yes – on request we supply HDPE flat bags (cracklier, higher tear resistance per wall thickness).
Printable with a logo?
Yes – flexo print (low-cost, from a larger run), gravure print (premium), digital print (small quantities). → custom-made.
Are special sizes possible?
Yes – in almost any size you wish. For individual requirements → request a custom-made product.
Sustainable flat bags?
Yes – from recycled LDPE with a GRS certificate → sustainable variant or with recycled content.
Which design is the cheapest?
Flat bags are the most economical bag design – the lowest material use, simple converting. For an upright display, stand-up pouches; for a premium box form, block bottom bags.
Your question isn't listed? More questions? Contact us
- Shipped from stock
- For businesses and private customers – volume pricing in the shop
- PPWR status shown for every product
- Personal advice on material and size







