Tubular film is a seamless plastic film in tube form. It is supplied extruded closed on two sides – you only need to seal the top and bottom to obtain a finished bag.
The standard material is LDPE (low-density polyethylene) – flexible, tear-resistant, recyclable. On request also in HDPE, recycled LDPE (GRS-certified) or food-grade to EU 10/2011. More in the PE tube guide.
Tubular films are endless PE tubes on a roll that are individually cut and closed into bags. The material thickness and film type determine the application area and processability.
Low-density polyethylene, flexible, clear, cost-efficient. The standard for light packaging: textiles, shipping packing, protective storage bags. Up to approx. 1 kg fill weight.
Reinforced material thickness for heavy or sharp-edged contents: tools, metal parts, industrial goods. Higher puncture and tear resistance. The standard for commercial shipping and storage applications.
Maximum material thickness for heavy-duty applications: bulk goods, industrial components, logistics packaging with a high impact and tear risk. Suitable for large quantities and storage packing.
High-density polyethylene film with a crisp look and high tear resistance at a low material thickness. Suitable for light packaging with high puncture resistance.
LDPE tubular films certified to EU 10/2011 for direct food contact. Declaration of conformity on request. Suitable for baked goods, fruit, vegetables and fresh food packing.
Tubular film is cut to the desired length at the end and closed by heat sealing. This makes content-specific bag sizes possible without keeping various bag formats in stock.
| Variant | Material | Thickness / property | Typical application |
|---|---|---|---|
| Standard | LDPE | 50 microns, clear, up to approx. 1 kg | Textiles, shipping, protective bags |
| Extra strong | LDPE | 100–150 microns, puncture-resistant | Tools, metal, commercial shipping |
| Industrial grade | LDPE | 200 microns, heavy-duty | Bulk goods, industrial logistics |
| Vest-bag look | HDPE | thin & tear-resistant | Light packaging with puncture protection |
Tubular films are produced in almost any widths and material thicknesses — the most flexible film packing in the range.
Freely selectable film thicknesses from 30 microns to 250 microns LDPE, in 10-micron steps. Choice according to contents: light textiles 50 microns, medium-heavy industrial goods 100 microns, sharp-edged or heavy 150–200 microns.
Tube widths from 50 mm to 1,500 mm possible. Standard roll length 100–500 m, depending on material thickness and roll diameter. For machine packing with a length stop we supply to specification.
Printing in flexo printing with up to 6 colours is possible, but rarely required in practice, as tubular film is mostly used unprinted for internal packing.
Minimum quantity and delivery time on request. Send an enquiry.
Tubular films made of pure LDPE are mono-material and fully recyclable in the PE stream.
Pure LDPE tubular film is classified as polyethylene by near-infrared detection (NIR) in German sorting plants and fed into the PE recycling stream. For commercial use, collection via a film collection system (e.g. Interzero, Reclay).
On request we process post-consumer recyclate with shares of 30–80 %. Recyclate tubular film is cost-efficient and ecologically advantageous, but not approved for food contact.
Tubular films already meet the EU Packaging Regulation today, as they are mono-material. Recyclable printing inks to the RecyClass design guideline on request.
Tubular film is material-efficient, as the bag length can be cut precisely to the contents — no standardised bag size with material loss at partial filling. Advice on optimal dimensioning on request.
Film rolls are shipped by the pallet or individually from our German warehouse. For special sizes, the delivery time is agreed individually. Free shipping from €200 net within Germany.
Tubular film is a seamless plastic film in tube form, produced by blown extrusion. Already closed on its two long sides – you only seal the top and bottom and you have a bag. Synonyms: PE tube, film tube, LDPE tubular film.
By the blown film process: PE granulate is melted at 180–220 °C, pressed through a ring die and inflated from the inside with air. The cooled film bubble is laid flat and wound onto a roll.
The standard is a 76 mm cardboard core. For special machines we supply other inner core diameters on request.
Width (laid flat) typically 100–800 mm, special sizes up to 1,500 mm. Length 200–1,000 m depending on the thickness. Order the exact variant you need → tubular film on a roll or cut to size.
30–60 microns (light), 60–100 microns (standard), 100–200 microns (heavy) → extra strong. Also thinner (25 microns) or thicker (250+ microns) as custom production.
The standard is yes – certified to EU 10/2011 with a declaration of conformity. → food-grade variant. LFGB conformity on request.
With a film sealing machine (impulse or bar sealer). Match the temperature and sealing time to the thickness – typically 3–5 seconds at 80 microns. A detailed guide in the film bag guide.
Tubular film is seamlessly closed on its two long sides; flat film is an open web without a longitudinal seam. For bag production, tubular film is more efficient – only 2 instead of 3 seal seams are needed.
Standard tubular film is not suitable for vacuum (too smooth). For vacuum applications you need structured vacuum film – as custom production.
Yes – LDPE stays flexible down to approx. −50 °C. For frequent freeze-thaw cycles a thicker wall (80–120 microns) is recommended.
Yes – on request we supply HDPE tube for special applications with higher tear resistance per wall thickness.
Pure tubular film is single-type PE. For aroma or UV protection we offer aluminum-laminated composite films as custom production – typical for coffee, tea, spices.
Example: 200 mm width, 80 microns, 500 m roll, 30 cm bag length → approx. 1,665 bags per roll.
Standard tubular film is available from our German warehouse – fast shipping. Custom production is made individually; delivery time and minimum quantity on request.
